New 5-in-1 Advanced Skincare Treatment Is Selling Out Fast!

Hurry! Only 148 Left At This Price!

Buy now
  • Smooth fine lines

  • Fade blemishes

  • Increase firmness

  • Decrease puffiness

  • Boost skin's glow

  • Amplifies serum

Frequently Asked Questions

How to charge the device?

Before the first use, it is necessary to fully charge the RECLAR beauty gadget for at least 90 minutes.The diode on the device will inform you about the full charge of the device, it should be blue.We recommend that you charge the device using the supplied cable by connecting it to a charger with a USB connector.

A full charge is enough for 45 minutes of work: 15 minutes for each procedure!

How to use the device?

We recommend that you watch the video instruction on our website homepage. To turn on the device, press the button and hold it for about 2-3 seconds. Then the beauty gadget will be turned on in standby mode - the status LED will blink sequentially.

To select the mode, short press the power button so that the indicator switches to the desired mode: 1st - ultrasonic peeling mode, 2nd - galvanotherapy and G-Blue light therapy, 3rd - galvanotherapy and G-Red light therapy.

How to use ultrasonic peeling correctly?

For ultrasonic peeling, the skin must be clean and wet (with enough water!). The device creates small waves that gently and effectively cleanse the skin, repelling water from its surface.

How to use G-Blue, G-Red galvanotherapy and light therapy correctly?

Galvanotherapy and light therapy should be done on clean skin with a sufficient amount of serum or serum applied. It is very important to carry out with a spatula NOT on dry skin, but on moistened skin - with serum or serum. Apply the product more than usual so that it is better absorbed. The device must be held at an angle to the face (it should, as it were, slide over the face), so that the light is turned on towards the face. The spatula of the device must be in full contact with the face and serum, otherwise the light may go out. Also hold the device correctly by the golden part of the body of the beauty gadget so that the current is transmitted to the skin.

How to turn the device on/off?

Hold the power button for 2-3 seconds, then select the desired mode for yourself.If you have not used the device for a long time, we recommend recharging the device before use.

To shut down the beauty gadget, press and hold the power button for 2-3 seconds.Thoroughly wipe the gadget spatula from cosmetics and dirt after each use with a damp cotton pad or napkin.Let the appliance dry completely.Store the device in a place that is not too damp.

Are there any contraindications?

RECLAR beauty gadget is a beauty device for home use.The device very carefully cleans and cares for the skin, so it is suitable even for sensitive skin.But since the device works with current, please pay attention to the following contraindications:

  • Pregnant women are recommended to use only the ultrasonic peeling mode and it is not recommended to use the G-Blue, G-Red mode.
  • It is not recommended to use the G-Blue, G-Red mode for those who have metal parts in their bodies (braces, implants, etc.)
  • It is not recommended to use the device on the face area where there are open wounds.
  • If you have other medical conditions, please consult your doctor before purchasing.
  • For normal skin, the RECLAR beauty gadget can be used daily, for those with sensitive, problematic skin 1-3 times a week.

How the peeler works?

The peeler combines 4 technologies - ultrasound peeling, galvanic current and blue and red light:

  • The ultrasound peeling removes impurities, sebum and old skin.
  • The G-Blue feature combines the galvanic current and light therapy (blue light). The galvanic current is set to negative polarity which improves blood circulation and stimulates the lymphatic system. The blue light heals acne and small scars, disinfects the skin and helps prevent inflammation.
  • The G-Red feature combines the galvanic current and light therapy, this time with red light. The galvanic current is set to positive polarity which supports collagen creation and helps the skin absorb up to 10 times more active substances from cosmetic products. The red light activates collagen, improves blood circulation as well as skin elasticity and closes pores. 

How the Ion Mist works?

How does the Reclar Ion Mist work?

It provides immediate and effective skin hydration. The ultraviolet light in the ion mist sterilises the skin and protects it against viruses and bacteria. The UV rays also disinfect the liquid in the spray so when it gets to your skin, it is completely pure. Ionising helps the skin absorb moisture and nutrients, which enhances the effects of your cosmetic products. Ion mist can be used before or after applying make-up. For maximum effect we recommend using ion mist along with our Reclar Camellia essence.

How and when will I get my order?

You can read our shipping policy here.

How do I return an order and get a refund?

You can read our refund policy here.